We proudly offer the following sheet metal tools for your copper roof installation needs from our close friends at John Stortz & Son, Inc.
ESE Hand Seamers
ESE 001C - Classic First Stage Hand Seamer
It is hard to find a better first stage hand seamer on the market today. The price is right for this high quality tool and it should be a part of any professional roofer who works often with standing seam roofs.
For a double lock, pair up with the ESE 099 Finish Hand Seamer
Works on profiles 1/2" across, and 3/8" on the down leg
Max Bending
Steel - 24 GA.
Aluminum - 0.032
Copper - 20oz
Dimensions
Weight - 5 lbs
Length - 19"
Width - 10"
*seams approximately 7.50" at a time. The pivot is 10" but there are reliefs on each side to allow a smooth transition between each crimp
ESE Hand Seamers
ESE099 - Finish Hand Seamer
The finishing seamer has a unique locking device which clamps the tool onto the seam. This prevents the tools from rising up off the seam and makes the finish bend seem easy.
Double lock hand seamer
Forms the 180 degree bend
Before using this tool prepare the seam with the ESE 001 or ESE 001C to a single lock bend
For hard to reach spaces or to seam the whole roof
Lightweight and easy to use
Will not scratch or peel paint
Max Bending
Steel - 24 GA.
Aluminum - 0.032
Copper - 20oz
Dimensions
Weight - 7 lbs
Length - 24"
Width - 11.5"
*seams approximately 7" at a time. The pivot is 11" but there are reliefs on each side to allow a smooth transition between each crimp.
Soldering Irons
Basic Soldering Kit
The Express line of Soldering Irons are European engineered to save you time and provide consistent high quality craftsmanship. Designed for use in the roofing and sheet metal industry, models are available for every type of light or heavy soldering. The Express line will save time and money for your business. Anyone who has soldered the old way with pots and hand irons will love these advanced soldering irons.Become the professional.
Copper head is lightweight and easily maintained and changed
There is no exposed flame
Continuous heat efficiency, no switching of soldering irons needed due to loss of heat, no cold soldering joints
Two position spring action stand
Substantial gas savings over competitive units, up to 60% less consumption
Cast iron heat chamber provides wind protection and will not rust, dent or deform
Four types of tips are available
Includes hose, regulator & medium tip
Heats up in 1 minute
Thumb operated valve provides for ease in regulating heat at the tip
Regulating heat at the tip prevents overheating and prolongs tip life
Soldering lines will be smooth and uniform, with no stop and start marks
Hose connector swivels 360 degrees, preventing hose from tangling
Copper tip swivels 360 degrees and has a +5 degrees or -5 degrees adjustable angle
Can be used with 5 lb, 10 lb, or 20 lb. L/P tank (not included)
